|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-07-2006, 04:17 PM
|
#1 | ||
|
Regular Member
Join Date: Apr 2006
Posts: 72
|
Hey guys,
Hope his question doesn't ensue any lively debates hahaha..... But anyways I have found a sierra 5-speed in my local trading post and wish to fit it to my 1979 4 door escort. My questions are; 1. Will my tail shaft need to be shorted or anything drastic like that. 2. Will the manual transmission tunnel need any modifications. Also any other pointer would be great. Cheers James |
||
|
|
|
07-07-2006, 05:59 PM
|
#2 | |||
|
tufLTD
Join Date: Jul 2005
Location: Gympie, Qld
Posts: 1,231
|
Quote:
It should bolt straight in. The tailshaft should be OK for length too. You may have to cut a hole further back for the shifter, I know in Mk1's the shifter sits about 2" further back with the Sierra box. |
|||
|
|
|
|
07-07-2006, 06:45 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: South Australia
Posts: 3,173
|
Depending on the tunnel (some are narrower than others) the original rear gearbox mounts (that are welded to the floor) may need moving as the box is a fair bit wider and won't fit. You'll also need a longer speedo cable.
|
||
|
|
|
|
07-07-2006, 09:02 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2005
Location: NSW
Posts: 1,802
|
Hi got a sierra 5 speed box in My RS .use a auto cross member and its a straight bolt up,though you need to move the gear lever hole back 2-3" and use a cortina 4 cyl(longer) speedo cable.
The ratios are no different to stock your just getting the 5th gear OD for express way use only. |
||
|
|
|
|
08-07-2006, 01:45 PM
|
#5 | |||
|
Regular Member
Join Date: Jun 2005
Posts: 126
|
Quote:
|
|||
|
|
|
Sierra 5 speed
Linear Mode
