Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 13-02-2006, 09:30 PM   #1
fred0
Starter Motor
 
Join Date: Jan 2006
Posts: 7
Default New Headlights

Does anyone have the below headlights, or ones like it, on their AU?

http://cgi.ebay.com.au/AU-Falcon-Per...QQcmdZViewItem

Was thinking about putting in some driving lamps on my AU1 Fairmont but these might do instead. Any opinions?

Cheers

fred0 is offline   Reply With Quote Multi-Quote with this Post
Old 13-02-2006, 09:31 PM   #2
Hitman
Way over here
 
Hitman's Avatar
 
Join Date: Dec 2004
Location: Perth W.A
Posts: 484
Default

I haven't got them, and I'm not a big fan of them either.
Hitman is offline   Reply With Quote Multi-Quote with this Post
Old 13-02-2006, 09:33 PM   #3
HLC
Audi S3
 
Join Date: May 2005
Location: Sydney.
Posts: 8,307
Default

the 'performance' doesnt mean they are better performing. buy some better globes for your car. check out Narva's range of globes for headlights. much better than the standard ones.
__________________
HLC is offline   Reply With Quote Multi-Quote with this Post
Old 13-02-2006, 10:24 PM   #4
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Mechan1k has them, or ones like them, on his car, so does Jonbays.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2006, 06:50 PM   #5
T3man
Banned
 
T3man's Avatar
 
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
Default

I bought a set for my car and found after fitting them that the adjusters were unusable and so I couldn't aim them at all. One light was fairly closely aimed as it came and I could judge from it that the light output was no better than the original lights. I sent them back. If you like the look of them check out the outer adjuster position. To be able to "screw" it you'll need to drill a hole in the panel work directly behind it BEFORE you fit the light and also my advice is to make sure you get the adjustment where you want it before fitting the bumper cover back on. It will save you a lot of work if you aren't happy with the lights. Be sure you get a money back guarantee in case you aren't satisfied.
T3man is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2006, 07:19 PM   #6
stiddy
Banned
 
stiddy's Avatar
 
Join Date: Jan 2005
Location: Beaumont Hills
Posts: 2,536
Default

im undecided on them.. they might grow on me.
stiddy is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2006, 08:39 PM   #7
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Quote:
Originally Posted by T3man
I bought a set for my car and found after fitting them that the adjusters were unusable and so I couldn't aim them at all. One light was fairly closely aimed as it came and I could judge from it that the light output was no better than the original lights. I sent them back. If you like the look of them check out the outer adjuster position. To be able to "screw" it you'll need to drill a hole in the panel work directly behind it BEFORE you fit the light and also my advice is to make sure you get the adjustment where you want it before fitting the bumper cover back on. It will save you a lot of work if you aren't happy with the lights. Be sure you get a money back guarantee in case you aren't satisfied.
Same here .... I have adjusted them the best I can. The left/right adjustment is behind the guard ... the only way to adjust that is take the headlight out and put it back in again.

It think they were cheaper as a pair brand new on www.ozeparts.com.au

But I am thinking of getting the standard AU headlights and getting the surrounds painted black .... at least the adjustment is better ... and the beam pattern is better on the standard headlight as well. TRUST ME ... and I use HIDs through them too.

Oh ... the aftermarket HID globes/kits burn large holes through reflectors tooo ... ooopsey.

IMHO ... they look nice ... but that's all ... I am going back to the factory look ... and slightly modified (projectors custom mounted inside and black surround).
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2006, 11:53 PM   #8
fred0
Starter Motor
 
Join Date: Jan 2006
Posts: 7
Default

Thanks for the feedback guys. I might stick with the originals for now.

Cheers
fred0 is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 04:11 AM   #9
AWD Chaser
Formally Kia Chaser
 
AWD Chaser's Avatar
 
Join Date: May 2005
Location: Newcastle
Posts: 2,493
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

hahahaha

Quote:
he 'performance' doesnt mean they are better performing
You mean like performance Pedals.

haha - I just got Performance Pedals fitted and I swear they make my car got 1/2 second better on the quarter!

I dont like them - for functional reasons, I like the stock headlights.
__________________
Kia Grand Carnival (2006)
Silver, Grill Mesh, Tints, Sidesteps (with lights), Towbar, 7" Touch Screen DVD Tuner with intergrated GPS & Bluetooth, Roof Mounted Flip Down 15.1" LCD Screen, Reverse Camera - 184Kw

HSV Clubsport R8 VY (2003)
Black, 6sp Manual, Coulson Seats, Red on black interior, Pacemaker extractors, Twin 2.5" exhaust, Custom Red 20" VE GTS Rims, Custom Red Stitching
AWD Chaser is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 08:01 AM   #10
OzJavelin
FF.Com.Au Hardcore
 
OzJavelin's Avatar
 
Join Date: Jun 2005
Posts: 3,633
Default

I always thought stock AU lights worked better than just about anything else for spread and throw?
Rod.
OzJavelin is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 10:24 AM   #11
AU:PROJECT:UTE
Drought Breaker
 
AU:PROJECT:UTE's Avatar
 
Join Date: Oct 2005
Location: Gunnedah, NSW
Posts: 199
Default

I'd have to agree there if someone made aftermarket lights that could perform better than the original equipment then I'd be interested. Not having a go at the E Series guys but AU headlights /\/\/\/ all over everything and give BA's a bloody close run too.
Personally if you want more light put some 100W/80W H4's and 100W H1 globes, that'll shine through all soughts of muck and darkness. Have tryed this personally and it works like having a pair of 10" IPF's on the front.
__________________
2002 AUIII XL W/- Custom Tray
ALL COUNTRY: SW Platt Mccann 5 Poster, GME 4706 7' Whippys, Uniden UH015SX UHF AND Scanner combo, Narva Taurus Bull lights, Hawk Grille, Series II Pursuit Side Skirts, Stickers on the back window and more eartags than a mob of cranky angus

ALL GO: XR6 VCT donk and ECU NO MORE!!
Now even MORE fun with 200kw XR8 and 5 speed, Tickford Cluster, 3.45 LSD, full custom twin system w/- 3" chrome angle cut tips :
AU:PROJECT:UTE is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 11:48 AM   #12
autickfordfairmont
Tickford Equiped
 
autickfordfairmont's Avatar
 
Join Date: Jan 2005
Location: Tweed Coast
Posts: 418
Default

I dont mind the look of those lights, but only if you have a kit to go with it (Like the silver Ute on TV where he comes around a bend to fast, flicks it sideway to avoid a truck and gets T-Boned, that Ute has those lights) but i still think that the standard ones look fine, at least the Fairmont ones, they are clean looking & give off great light spread. I read somewhere that they are 50% (or something) brighter then the EF/El ones just from the reflector design. I am running those Arctic blue lights in them and they give off great white light spread. Was running 80/100w H4's and 100w H1's in my old EA and they were pretty good to but ran pretty hot. I even ran some 90/130w H4's for a while but in the old EA they started to melt the plastic reflector a bit so had to take em out.

With the Arctic Blue ones and the sort, they claim that a 55/60w Globe gives off the equivilent light of a standard 80/100w Globe. If you thow a set of them you will have pretty good lights in my opinion.
__________________
Genuine Tickford Equiped 1998 AU Fairmont
Mods: ....... Dash mat & Air Freshener, does that count as a mod??????
Sports Exahust, Tickford Intake Snorkle, K&N Filter, NGK Plugs, Top Gun Leads
TS50 Front Bar with Fog lights, TS50 Rear Bar. Injected LPG System,
autickfordfairmont is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 01:14 PM   #13
AU:PROJECT:UTE
Drought Breaker
 
AU:PROJECT:UTE's Avatar
 
Join Date: Oct 2005
Location: Gunnedah, NSW
Posts: 199
Default

This is a little off thread but that silver ute that gets T Boned, has standard lights and has silver pieces that are part of the body kit over the lights to give the lights a dissected look between the lens of low beam, high beam, and indicators.
I just put that same front bar and grille on my ute, looks very tidy and individual with AU2 pursuit skirts and swapped my tray for a tub.
__________________
2002 AUIII XL W/- Custom Tray
ALL COUNTRY: SW Platt Mccann 5 Poster, GME 4706 7' Whippys, Uniden UH015SX UHF AND Scanner combo, Narva Taurus Bull lights, Hawk Grille, Series II Pursuit Side Skirts, Stickers on the back window and more eartags than a mob of cranky angus

ALL GO: XR6 VCT donk and ECU NO MORE!!
Now even MORE fun with 200kw XR8 and 5 speed, Tickford Cluster, 3.45 LSD, full custom twin system w/- 3" chrome angle cut tips :
AU:PROJECT:UTE is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 01:18 PM   #14
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

Quote:
Originally Posted by AU:PROJECT:UTE
This is a little off thread but that silver ute that gets T Boned, has standard lights and has silver pieces that are part of the body kit over the lights to give the lights a dissected look between the lens of low beam, high beam, and indicators.
I just put that same front bar and grille on my ute, looks very tidy and individual with AU2 pursuit skirts and swapped my tray for a tub.
XR Strider and I were looking at this very closely over the weekend... we had the clip frozen and zoomed in and all it appears to be is either a plastic or painted "eyebrow" over the top part of the light. Effectively narrowing the look of the light to almost match evenly with the grill height....

Then the car got hammered :(
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 04:55 PM   #15
sfr rob
○○○○○○○○○○○○○○○○○○○○ ○○○○○
 
sfr rob's Avatar
 
Join Date: Mar 2005
Posts: 5,954
Default

they look good when you use a hammer on them, honestly, they are the worst headlights i have ever seen, nothing wrong with color coding your bezel's!!!
sfr rob is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 04:56 PM   #16
sfr rob
○○○○○○○○○○○○○○○○○○○○ ○○○○○
 
sfr rob's Avatar
 
Join Date: Mar 2005
Posts: 5,954
Default

oh and AU headlights are SUPERB! better than standard BA headlights, thats for sure!
sfr rob is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 06:07 PM   #17
boodek
Ferret
 
Join Date: Aug 2005
Location: Wodonga, Victoria
Posts: 51
Default

Quote:
Originally Posted by AU:PROJECT:UTE
I'd have to agree there if someone made aftermarket lights that could perform better than the original equipment then I'd be interested. Not having a go at the E Series guys but AU headlights /\/\/\/ all over everything and give BA's a bloody close run too.
Personally if you want more light put some 100W/80W H4's and 100W H1 globes, that'll shine through all soughts of muck and darkness. Have tryed this personally and it works like having a pair of 10" IPF's on the front.
I thought the general consensus was that it is best to stick with standard wattage globes in polycarbonate lens headlights? I'm about to get a set of Narva Plus 50s for my AU, but if it's safe to stick 100/80 and 100w globes in, I'd rather do that. By the way, the headlights on my work BA ute are much better at present than our AU Futura, but it does need new globes and a decent aim.
boodek is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 08:44 PM   #18
The Dok
FF.Com.Au Hardcore
 
The Dok's Avatar
 
Join Date: Feb 2005
Posts: 805
Default

Quote:
Originally Posted by boodek
I thought the general consensus was that it is best to stick with standard wattage globes in polycarbonate lens headlights?
Got it in 1. Unless of course you don't mind premature ageing & burning of the lenses, & that's not just for the oncoming drivers, the headlights too. The BA headlights are a step up from the AU mainly because of a more concentrated (smaller) reflector surface & overall smaller size incorporating the same H4 globe as the AU.
__________________
Removed by laminge
The Dok is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 08:45 PM   #19
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

AU XR's... last of the Glass lenses
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 09:04 PM   #20
The Dok
FF.Com.Au Hardcore
 
The Dok's Avatar
 
Join Date: Feb 2005
Posts: 805
Default

Quote:
Originally Posted by Casper
AU XR's... last of the Glass lenses
Ahhhhh, not sure mate......if you like, to test the theory, I can perform the "drop test" on these 2 I've put aside for you. If they break......you were right, if they don't, you can still have them. :
__________________
Removed by laminge
The Dok is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 09:12 PM   #21
AWD Chaser
Formally Kia Chaser
 
AWD Chaser's Avatar
 
Join Date: May 2005
Location: Newcastle
Posts: 2,493
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
silver pieces that are part of the body kit over the lights
They are called eyelids.Quite common in the bodykit world. Alot of modded Nissans and VL's have eyelids, narrowing the look of the headlight and making them more look like eyes.
__________________
Kia Grand Carnival (2006)
Silver, Grill Mesh, Tints, Sidesteps (with lights), Towbar, 7" Touch Screen DVD Tuner with intergrated GPS & Bluetooth, Roof Mounted Flip Down 15.1" LCD Screen, Reverse Camera - 184Kw

HSV Clubsport R8 VY (2003)
Black, 6sp Manual, Coulson Seats, Red on black interior, Pacemaker extractors, Twin 2.5" exhaust, Custom Red 20" VE GTS Rims, Custom Red Stitching
AWD Chaser is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 09:14 PM   #22
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

Quote:
Originally Posted by The Dok
Ahhhhh, not sure mate......if you like, to test the theory, I can perform the "drop test" on these 2 I've put aside for you. If they break......you were right, if they don't, you can still have them. :
I'm betting that dropping them would be REALLY bad! Glass doesnt like impacts like that. :
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 09:21 PM   #23
The Dok
FF.Com.Au Hardcore
 
The Dok's Avatar
 
Join Date: Feb 2005
Posts: 805
Default

Quote:
Originally Posted by Casper
I'm betting that dropping them would be REALLY bad! Glass doesnt like impacts like that. :
Seemed like a good idea at the time, however, in hindsight, best not. Getting too bloody hard to get now.
__________________
Removed by laminge
The Dok is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2006, 09:40 PM   #24
AUIII XR8 MAN
DJR TM#54
 
AUIII XR8 MAN's Avatar
 
Join Date: Jan 2005
Location: on my p.c now with internet! ok i'll still use works internet too.
Posts: 2,248
Default

Trust me they are glass as i have smash a few :
__________________
When traveling to V8 Supercar rounds, i book through KYLEE MOLE Travel agents, She Goes, She Goes, She Goes & I just went.
Now Zetec Powered. 1.6lt of madness. But the XR8 still remains
AUIII XR8 MAN is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2006, 12:08 AM   #25
divine_afg
Extreme_Custom
 
divine_afg's Avatar
 
Join Date: Aug 2005
Location: Melb SE
Posts: 863
Default

hello everyone
well not a big fan of them AU lights they dont look that good at all
was going to get them for my car but ... wen i saw a pair on a wagon that Extreme Kits did .. didnt like it although i think the only way they would look better is if you
paint them black .......... it would look nice similar to XR's
cheers
__________________
If You Think AU Are Ugly ! Check my X Out.........
Loved by one ... Admired by many ... Envied by most !
RIP - F6
divine_afg is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2006, 07:30 AM   #26
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Quote:
Originally Posted by sfr rob
oh and AU headlights are SUPERB! better than standard BA headlights, thats for sure!
You must have awful BA headlights ... the Headlights on the Territory (very similar to BA Falcon) outclass the AU (my factory headlights I have sitting in the garage) ... even though the AU headlights are pretty damn good ... the Territory lights flog them for beam pattern and clarity.

Then there's the highbeam on the Territory .... damn ... they give my Lightforce 240s a run for their money ... hee hee
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2006, 02:54 PM   #27
autickfordfairmont
Tickford Equiped
 
autickfordfairmont's Avatar
 
Join Date: Jan 2005
Location: Tweed Coast
Posts: 418
Default

sMy mistake with the ad, i saw it again and your right, they are eyelids.

Still i prefer the standard lights.
__________________
Genuine Tickford Equiped 1998 AU Fairmont
Mods: ....... Dash mat & Air Freshener, does that count as a mod??????
Sports Exahust, Tickford Intake Snorkle, K&N Filter, NGK Plugs, Top Gun Leads
TS50 Front Bar with Fog lights, TS50 Rear Bar. Injected LPG System,
autickfordfairmont is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:10 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL