Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 29-09-2013, 05:43 PM   #1
Beer Baron
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
Default AU1 XLS central locking not flashing hazards ?

Hey Hey,

I have an AU1 xls ute and when i lock the car with the remote it locks but the lights dont flash. Is this something that i can turn on ?

Cheers Des.

__________________
AU XLS.
Beer Baron is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2013, 06:42 AM   #2
Mr Hardware
Flairs - Truckers Delight
 
Mr Hardware's Avatar
 
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
Tech Writer: Recognition for the technical writers of AFF - Issue reason: The excellent how to on LPG jet cleaning. 
Default Re: AU1 XLS central locking not flashing hazards ?

Check your fuses maybe??
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon"
Mr Hardware is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2013, 09:45 AM   #3
auIILTD
5.6L x 2 pilot
Donating Member2
 
auIILTD's Avatar
 
Join Date: Dec 2009
Location: Canbra
Posts: 15,070
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the effort put into the Australia day cruise to Albury Tech Writer: Recognition for the technical writers of AFF - Issue reason: AU Tech article. 
Default Re: AU1 XLS central locking not flashing hazards ?

Hi Des.

I assume the you have checked and the hazards work normally?

Stu
__________________
2002 AU II LTD

5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust.

Quarter Mile: 13.73 @ 105.86mph


Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024

2002 XR8 pursuit 250

Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
auIILTD is online now   Reply With Quote Multi-Quote with this Post
Old 30-09-2013, 12:20 PM   #4
Beer Baron
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
Default Re: AU1 XLS central locking not flashing hazards ?

Yes, hazards work fine and fuses are all ok.
__________________
AU XLS.
Beer Baron is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2013, 12:59 PM   #5
auIILTD
5.6L x 2 pilot
Donating Member2
 
auIILTD's Avatar
 
Join Date: Dec 2009
Location: Canbra
Posts: 15,070
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the effort put into the Australia day cruise to Albury Tech Writer: Recognition for the technical writers of AFF - Issue reason: AU Tech article. 
Default Re: AU1 XLS central locking not flashing hazards ?

Strange. Never seen of heard of it before. Hopefully someone on here will know what is going on - hopefully something simple.

Stu
__________________
2002 AU II LTD

5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust.

Quarter Mile: 13.73 @ 105.86mph


Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024

2002 XR8 pursuit 250

Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
auIILTD is online now   Reply With Quote Multi-Quote with this Post
Old 30-09-2013, 02:09 PM   #6
Maka
Au Falcon = Mr Reliable
 
Maka's Avatar
 
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Embodiment of the AFF spirit in his efforts with ACP. 
Default Re: AU1 XLS central locking not flashing hazards ?

Your bem fuse ok? The bem (body electronic module) is faulty if your hazards are working but not working from your key fob according to my ellery's manual. You probably need another matching bem to test & replace after eliminating faults from wiring to it (bem) if theres any. If your not too handy with the tools, a trip to the sparky may be in order. i hope someone with some more knowledge will chime in very soon for you, good luck!

cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792

Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007)
Maka is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-09-2013, 03:38 PM   #7
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default Re: AU1 XLS central locking not flashing hazards ?

Had a trailer on recently? Often I think faults occur when dodgy wiring is introduced to the trailer plug.
mik is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2013, 06:43 PM   #8
Beer Baron
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
Default Re: AU1 XLS central locking not flashing hazards ?

Only just bought the car. Was very cheap. I'll double check fuses again.
__________________
AU XLS.
Beer Baron is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2013, 10:43 PM   #9
foxtrot3
FF.Com.Au Hardcore
 
foxtrot3's Avatar
 
Join Date: Apr 2008
Posts: 5,489
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical articles. 
Default Re: AU1 XLS central locking not flashing hazards ?

Hi. Is it still using ford remotes? seem a few cars of this age where people use cheap remote locking kits to drive the factory locks. Cheers MD
__________________


HI

I'M MICHAEL

2003 ACID RUSH BA FUTURA WAGON

light up window switches | auto on cruise control | doubleclick window lift from remote
foxtrot3 is online now   Reply With Quote Multi-Quote with this Post
Old 01-10-2013, 06:24 PM   #10
Beer Baron
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
Default Re: AU1 XLS central locking not flashing hazards ?

Quote:
Originally Posted by foxtrot3 View Post
Hi. Is it still using ford remotes? seem a few cars of this age where people use cheap remote locking kits to drive the factory locks. Cheers MD
Yes, ford ute remote.

Also cycles the lock about 3 times when i unlock the door and then again when i open the door.
__________________
AU XLS.
Beer Baron is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:38 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL