|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-11-2008, 10:43 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
|
Just wanted to know how easy/hard this is, and how long would it take, just to plan ahead. How hard is it to get it back up is it as simple as bolting in the 2 front cradle bolts and then jacking the rear up and putting in the 2 rear bolts?
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm. |
||
|
|
|
09-11-2008, 11:11 PM
|
#2 | |||
|
AU DIE HARD
  
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
 
|
Nearly that simple 6 bolts
 : allow 2 1/2 3 hours tops
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .........................  .........................Quote:
|
|||
|
|
|
|
09-11-2008, 11:48 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
|
cool thanks mate.
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm. |
||
|
|
|
|
12-11-2008, 04:35 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
|
Well im off to a wonderful start with 1 broken rear chassie bolt, i got it all in and then had to pull it all out again cause i then found that the S1 handbreak cable is longer than in S2, so i have had to pull it all out again so that i can swap that over now, and then try again.
Note to self, with an LSD putting 2 wheels on it doesnt make it easy to move around. Note 2 - IRS cradle to heavy to lift by one's self.
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm. |
||
|
|
|
|
12-11-2008, 07:51 PM
|
#5 | ||
|
Back to N/A land
Join Date: Jan 2005
Location: Perth
Posts: 610
|
Yup def heavy !!!
We used 3 jacks to help move it and raise mine up.. Hat goes off to you for doing it yourself ! |
||
|
|
|
|
12-11-2008, 08:59 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
|
Yep all done now, car drives far better, performance wise its not very good, but thats more as issue of me changing stuff while it was apart and therefore a fair wack out of tune.
Now im going to lie down till 2pm tomorrow when i have to goto work to give my back time to recover, im sore, real sore!
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm. Last edited by 5.0 ED; 12-11-2008 at 09:11 PM. |
||
|
|
|
Swapping over complete IRS cradle
Linear Mode
