|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-07-2006, 02:37 PM
|
#1 | ||
|
AU/BA
Join Date: Jun 2006
Posts: 23
|
Some people may think this a silly question, but are the Transmission Lines aluminium or steel?
Also, when fittiing a cooler is it necessary to flare the pipe ends before connecting the rubber pipes to them? Cheers Rosscoe |
||
|
|
|
04-07-2006, 04:32 PM
|
#2 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
|
Not sure what they are made from - something metallic. I'd bet on steel though, but could be copper or brass.
You should flare the pipe if you can. I kind of flared mine using long nose pliers, and then fed plenty of rubber hose (4 to 6 inches) onto the pipe and double clamped it.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
04-07-2006, 08:12 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,463
|
Pipes are steel, as with flaring, JC's idea works well, I also do this & haven't seen any problems with it.
|
||
|
|
|
|
05-07-2006, 08:39 PM
|
#4 | ||
|
AU/BA
Join Date: Jun 2006
Posts: 23
|
I will try and get hold of a pipe flarer, if not, the pointy nose pliers will do, thanks for the feedback guys!
Cheers Rosscoe |
||
|
|
|
|
06-07-2006, 01:53 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
supercheap sells a pipe flaring kit
has multiple sizes in the 1 kit duno what the cost is just saw it at work tonite
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||
|
|
|
|
06-07-2006, 08:53 AM
|
#6 | ||
|
AU/BA
Join Date: Jun 2006
Posts: 23
|
Thanks, was going to check out Supercheap, I know that Just Tools in South Melb, has a mini pipe cutter for $14 and a couple of pipe flarer kits, one at $29 and one at $47, but will see if I can borrow one first.
Cheers Rosscoe |
||
|
|
|
Tranmission Oil Lines
Linear Mode
