|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
06-03-2006, 06:54 PM | #1 | ||
SS Grunt
Join Date: Oct 2005
Location: Melbourne-DEER PARK
Posts: 1,091
|
I know these things are crap and mine finally packed in well it is jammed, so my next quest is how do i remove the player ive put in the little tools and it still wont come just one side has moved and the other on the left wont budge at all. Any help would be good please.
|
||
06-03-2006, 08:00 PM | #2 | ||
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,704
|
You have to push the tools in to the holes, and once you hear/feel the click, you need to put outwards pressure on the tools - the right to the right, and the left to the left.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
06-03-2006, 08:02 PM | #3 | ||
FTF Car Club NSW
Join Date: Dec 2004
Location: The Shire NSW
Posts: 1,791
|
my one is slowly dieing again, almost exactly a year to the day since it was replaced.....
|
||
06-03-2006, 08:20 PM | #4 | ||
SS Grunt
Join Date: Oct 2005
Location: Melbourne-DEER PARK
Posts: 1,091
|
if you dont mind me asking how much do these things cost to replace and which ford has them do they all? is it like chage over or buy it outright
|
||
06-03-2006, 08:21 PM | #5 | ||
FTF Car Club NSW
Join Date: Dec 2004
Location: The Shire NSW
Posts: 1,791
|
any ford dealer will charge approx. $250 to give you a replacement unit. If there are cd's stuck in there they will send it away to get removed and they will be posted back
|
||
06-03-2006, 08:29 PM | #6 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,861
|
Quote:
James |
|||
06-03-2006, 09:15 PM | #7 | |||
FTF Car Club NSW
Join Date: Dec 2004
Location: The Shire NSW
Posts: 1,791
|
Quote:
|
|||
06-03-2006, 09:25 PM | #8 | ||
Built Ford Tough
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
|
Mines still soldiering on.
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread '55 F100, just a roller at the moment, new project Silver MY12 Volkswagen Amarok |
||
06-03-2006, 11:46 PM | #9 | ||
Regular Member
Join Date: Dec 2005
Posts: 74
|
Well here's a story...
The day after i bought mine, i went on a road trip and decided to load up the stacker, only to find that the previous owner had jammed one in there i didnt know so proceeded to load 6 more in there, well the whole thing siezed up so i proceeded to investigate, ripped it outta the dash and dissected it to find that the trays that hold the cds, 2 had broken and the mechanisms where all choked up. Anyways pulled all the cds out and several hours and lots of supergluing id fixed it all up, put it back in to find i didnt have the code, well coffey ford charged me $15 for a business card with it written on the back the lousy bastards! anyways the next day it did it all again, but this time i was more careful... all in all spent around 8 hours fixing it and havnt had a problem since and didnt cost me a cent HOWEVER its the cheapest lousiest cd player in the world, wont play some cds and doesnt like hot days... ford charge hundreds for replacements do yourself a favour and go out and buy a dvd player and screen combo double din unit which can utilise the 11 factory speakers... sounds sweeet as and for only a couple hundred more than replacing the factory!
__________________
AUII Xr6 Manual + Silhouette + Tickford Bodykit + Alloys + Momo Kit = Dreamy! |
||
06-03-2006, 11:49 PM | #10 | ||
Regular Member
Join Date: Dec 2005
Posts: 74
|
i should also mention that its a ИИИИИ to get them out without the right tools, do NOT attempt a butter knife or reefing it out - it will damage the plastic surround and look ИИИИ aftermath. Focus on one side at a time, reach underneath and feel around for the back of the unit with one hand, use the other for one of the tools and push it out, just work it back and forth and it will come loose pop out a bit, then do the other side, but be sure not to take the tool out of the side you just got free or it will click back in again. any problems, PM me im glad to help
Good luck mate.
__________________
AUII Xr6 Manual + Silhouette + Tickford Bodykit + Alloys + Momo Kit = Dreamy! |
||
06-03-2006, 11:50 PM | #11 | ||
Regular Member
Join Date: Dec 2005
Posts: 74
|
dont forget to try JC's way first, if that aint work try mine :-)
__________________
AUII Xr6 Manual + Silhouette + Tickford Bodykit + Alloys + Momo Kit = Dreamy! |
||
07-03-2006, 05:48 AM | #12 | ||||
AU DIE HARD
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
|
Quote:
and I dont think I own a cassette any more to use if the cd stops.
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .................................................. Quote:
|
||||
07-03-2006, 04:11 PM | #13 | ||
Regular Member
Join Date: Feb 2006
Posts: 63
|
Where can you buy those U shaped radio extractor tools from?
|
||
07-03-2006, 11:05 PM | #14 | ||
SS Grunt
Join Date: Oct 2005
Location: Melbourne-DEER PARK
Posts: 1,091
|
Thanks for all the helpful info, anyways its all fixed now, i got the guys at autobarn to slide it out for me and he said its the hardest one he ever had the thing didnt wanna budge even with the proper tools he had but still didnt charge me, i then pulled it out and opened up the top of it and found that one cd out of the 6 had stacked on top of another and jammed it up so it came out of its slides, i then fixed that and put vasoline on all the gears and moving parts cause whoever makes these FMS audio i think are tight and run them dry (maybe why they bind up) and then i put it all back together and plugged it in and then found 2 globes on butt 1,2,3,4 so changed them courtesy of a old EF unit and soldered them in. so now it seems to be fine but let yas know how long it goes for, And for wanted 120 to remove it and quote it, Thanks for all the help
|
||
07-03-2006, 11:38 PM | #15 | ||
Mercury Silver T3
Join Date: Jan 2005
Posts: 2,203
|
I can only think of 7 speakers in the premium setup including sub. Where are the rest that makeup the 11 speakers that are advertised?
__________________
House of Tickford T3 TS50 No.156 AUIII XR8 220 2017 Magnetic Mustang What to hear a tuff T3? Click herehttp://s7.photobucket.com/albums/y30...ent=Movie2.mp4 |
||
07-03-2006, 11:41 PM | #16 | ||
AKA MYTE8
Join Date: Dec 2004
Location: Melbourne
Posts: 2,325
|
Front has 4 1-way speakers (4 speakers)
Rear has 2 3-way speakers (6 speakers) Rear has 1 sub (1 speaker) Total = 11 speakers Have a look at this: http://www.fordforums.com.au/photos/...cat=665&page=1
__________________
Last edited by Tornado; 07-03-2006 at 11:48 PM. |
||