|
30-04-2011, 12:27 PM | #1 | ||
Banned
Join Date: Apr 2011
Posts: 740
|
Just a heads up: Ford has developed a new ECU map for the WS/WT Fiestas.
Dealerships got the program last week. They reset and put the new tune on my WS: free of charge. First impressions: marginally better response, slightly better midrange torque. Might be something to consider if you have time. (They couldn't tell me why there was a new program out though...) |
||
30-04-2011, 01:55 PM | #2 | ||
Regular Member
Join Date: Feb 2011
Posts: 360
|
any impact on fuel economy?
|
||
02-05-2011, 07:17 AM | #3 | ||
Starter Motor
Join Date: Jun 2010
Posts: 9
|
I complained to Ford at my last service that my WS has a flat spot when it's first started in the morning just off idle, and they said they would have to release an ECU calibration update in about a months time. Maybe this is it?
|
||
13-05-2011, 05:38 PM | #4 | |||
Regular Member
Join Date: Dec 2010
Posts: 37
|
A friend of mine is a Service Adviser at Gorell's Ford and he say's he's not aware of the upgrade. If it does exist (I had an update recently for the stereo and was advised it didn't do anything else) I'd be interested to see if it would affect my re-map if there is one!
Quote:
__________________
Fiesta WS, Milltek tubular exhaust manifold' 200 cell cat, full milltek stainless race system, j1 CAI, Bluefin remap, ford race shifter, Team Dynamics Race rims 17x7', Spax Coil Overs, iridium plugs, CFM 8.5mm leads, R1 drilled & grooved discs & ceramic pads, HEL braided s/s brake lines, econetic front under tray & fitting kit, CG Belt lock, Bridgestone RE002, Armster arm rest, Rack limiter, PowerFlex Bushes. FOR SALE!! |
|||
15-05-2011, 11:23 AM | #5 | |||
FF.Com.Au Hardcore
Join Date: Oct 2006
Location: Queensland
Posts: 1,801
|
Quote:
__________________
CURRENT: 2017 Escape Titanium 2.0L EcoBoost with Technology Pack in White Platinum PREVIOUS 2015 Fiesta ST / 2012 Focus Titanium / 2009 Fiesta Zetec / 2004 Fiesta Zetec |
|||
19-05-2011, 06:00 PM | #6 | ||
Banned
Join Date: Apr 2011
Posts: 740
|
My car was hesitant on cold mornings, worked better if you let it idle (like my R32 lol) for 3 minutes. It seems to be better after this remap. Wouldn't have thought cold was a problem for Fiesta's, coming from Europe and all......
Ford quality control - love it.... |
||
23-05-2011, 04:17 PM | #7 | ||
FF.Com.Au Hardcore
Join Date: Apr 2006
Posts: 976
|
Ours hesitates when cold too, no big deal since it's fine after 30 seconds warm up. But I get a bit of a wobble going trying to reverse out the driveway (uphill) sometimes
|
||
23-05-2011, 05:42 PM | #8 | ||
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 612
|
same here. on very cold mornings it does it on the very first gear change from 1st to 2nd. the last ecu update didnt change it for me.
|
||
23-05-2011, 10:32 PM | #9 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,311
|
Does it apply to WP and WQ Fiestas? thanx
__________________
CSGhia |
||
24-05-2011, 02:05 PM | #10 | ||
Banned
Join Date: Apr 2011
Posts: 740
|
Don't believe so - just for WS/WTs....
got my remap from Cumberland Ford Blacktown NSW. Watched them do it in the workshop so knew they weren't just pulling my leg. Results: better throttle response more than anything, starts/idles in the cold a little better - no big change though. Fuel consumption the same... Yes, mine also/still hesitates if you try and drive off in 1st within 10-30 seconds of start up - only in the colder mornings. Considering the car is made in Germany and Germany is such a hot country I'm not surprised. Oh wait, hang on, that's not right. Hmmm..... It's disappointing this seems to be a common problem - at least not isolated to one car... |
||
24-05-2011, 04:28 PM | #11 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,311
|
My WQ Zetec has had the problem from day 1..Cure ? start car and then put seat belt on and drive off. Works every time...ECU's been reflashed twice...no difference...
__________________
CSGhia |
||