Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 25-08-2007, 07:35 AM   #31
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

6 x 9s are crap anyway, as are any multi eliment speakers. As soon as you put a bit of bass through them they distort. You are best off getting splits and as said they make x 7 splits, but I don't think you can get 6x9 splits.
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 26-08-2007, 11:23 AM   #32
troyww
Starter Motor
 
Join Date: Aug 2007
Posts: 7
Default

Quote:
Originally Posted by JC

All wagon rear speakers are 4" round.
Incorrect . My AU series 1 AU wagon has 5" speakers . I know this because I returned the 4" units yesterday and had to swap them for 5" units which fit perfectly .
As for the front 6 - 6 1/2 inch units will fit with an adapter and a fair amount of mucking about .
I read elsewhere that you could get the windscreen piller moulds from ford with tweeter holes moulded in , from the upspecced AU for around $40 . I thought this was a bargain and indeed are a bargain . Well they would be if it wasn't for the fact that they are now an obsolete item . NOT GOOD ENOUGH FORD . How common is it for ford to discontinue parts after only 5 years .
troyww is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2007, 12:40 PM   #33
hoich
Regular Member
 
hoich's Avatar
 
Join Date: Apr 2005
Location: Melbourne
Posts: 189
Default

Thanks for all the tips guys. I have installed MTX 5x7 in the rear and will do the fronts next weekend if I get the chance.

Sounds a lot better

Hoich
__________________
2016 MD Mondeo Titanium Hatch
hoich is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2007, 12:52 PM   #34
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

Quote:
Originally Posted by troyww
Incorrect . My AU series 1 AU wagon has 5" speakers . I know this because I returned the 4" units yesterday and had to swap them for 5" units which fit perfectly .
As for the front 6 - 6 1/2 inch units will fit with an adapter and a fair amount of mucking about .
I read elsewhere that you could get the windscreen piller moulds from ford with tweeter holes moulded in , from the upspecced AU for around $40 . I thought this was a bargain and indeed are a bargain . Well they would be if it wasn't for the fact that they are now an obsolete item . NOT GOOD ENOUGH FORD . How common is it for ford to discontinue parts after only 5 years .
The Ba pillers fit the AU, or atleast thats what people on here have said. I wouldn't have a clue, as I just make my own. Took a couple of hours and cost around $20 but I still need to sand them back a bit and cover them.

StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 27-09-2007, 09:29 PM   #35
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by b2tf
Kenwood make 5x7 speakers.
Um, found out today that they have discontinued them... Kenwood no longer make a speaker that suits a factory sized speaker that ranged from 1988 to 2003... :

Now i need to figure out what i'm going to do now... i dont want to do mods... i just want to drop some in and away i go.

Any suggestions for a moderate speaker that will sound good with an Amp?
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 27-09-2007, 09:55 PM   #36
ronwest
All Bran = Regular Member
 
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by BLUEPRINT
Any suggestions for a moderate speaker that will sound good with an Amp?
Have a listen to 5 x 7 Eclipse speakers.

They were my original choice before going to 6 1/2 " Eclipses.
ronwest is offline   Reply With Quote Multi-Quote with this Post
Old 27-09-2007, 09:57 PM   #37
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

What sort of prices am I looking at anyway?
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 27-09-2007, 10:12 PM   #38
ronwest
All Bran = Regular Member
 
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by BLUEPRINT
What sort of prices am I looking at anyway?
I can't really remember but I think the pair were somewhere around $300 ($340 rings a bell).

I got that price from Autobarn so a phonecall will give you a definite answer.
ronwest is offline   Reply With Quote Multi-Quote with this Post
Old 27-09-2007, 10:18 PM   #39
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Quote:
Originally Posted by BLUEPRINT
Um, found out today that they have discontinued them... Kenwood no longer make a speaker that suits a factory sized speaker that ranged from 1988 to 2003... :
Think I might have one last set in stock at work if you really want the Kenwoods. PM me and I'll check on Sunday.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 27-09-2007, 11:06 PM   #40
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

Quote:
Originally Posted by b2tf
Think I might have one last set in stock at work if you really want the Kenwoods. PM me and I'll check on Sunday.
PM sent
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 27-09-2007, 11:41 PM   #41
troyww
Starter Motor
 
Join Date: Aug 2007
Posts: 7
Default

Quote:
Originally Posted by stockoau
The Ba pillers fit the AU, or atleast thats what people on here have said. I wouldn't have a clue, as I just make my own. Took a couple of hours and cost around $20 but I still need to sand them back a bit and cover them.
thanks for the heads up .
I ended up sticking them on top of the doors but I'd rather have them stealth .
I'll ring them tomorrow and see what they say .
troyww is offline   Reply With Quote Multi-Quote with this Post
Old 28-09-2007, 08:51 AM   #42
waggaclint
FF.Com.Au Hardcore
 
waggaclint's Avatar
 
Join Date: Jul 2007
Location: perth w.a
Posts: 1,074
Default

does anyone know whats the biggest speakers you can fit in the rear of a wagon in the factory spot that is
(sorry to hi-jack this thread seemed like a good spot to ask)
Cheers Clint
waggaclint is offline   Reply With Quote Multi-Quote with this Post
Old 28-09-2007, 11:29 AM   #43
troyww
Starter Motor
 
Join Date: Aug 2007
Posts: 7
Default

Quote:
Originally Posted by waggaclint
does anyone know whats the biggest speakers you can fit in the rear of a wagon in the factory spot that is
(sorry to hi-jack this thread seemed like a good spot to ask)
Cheers Clint
5" in my series1 AU wagon
troyww is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:54 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL