Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > Blue Power Racing Developments

Blue Power Racing Developments The home of Blue Power. Website Link

Reply
 
Thread Tools Display Modes
Old 02-12-2007, 07:10 PM   #1
DJR02
Blown DJR
 
DJR02's Avatar
 
Join Date: Jan 2005
Location: Brisbane
Posts: 131
Default Valve springs

Hi,

I was just wondering, when you install a supercharger to a Boss engine you upgrade the valve springs?

Cheers Jeff

__________________
DJR320 build No 2
DJR02 is offline   Reply With Quote Multi-Quote with this Post
Old 03-12-2007, 08:59 AM   #2
Chris
AFF.com.au
 
Join Date: Dec 2004
Posts: 2,128
Default

Quote:
Originally Posted by DJR02
Hi,

I was just wondering, when you install a supercharger to a Boss engine you upgrade the valve springs?

Cheers Jeff
Hi Jeff,

The quick answer is just "no", however, we make the recomendations that if a client wants to

*exceed 8-10psi boost
*run camshafts narrower than 112lobe with extra lift
*use the car for competitive use

we recommend upgrading of pump gears and valve springs. On our Blower option engine, all these things are included, however when someone "starts" on a blower program at say, 300-330rwkw, you will find it wont be long before the addiction takes over, and 400 becomes the target, then 500, etc etc.

We take it on a case by case basis, and as cases do vary, we warn people, and leave it at that. A smart client will heed advice and follow a sensible program, and have trouble free motoring.
Chris is offline   Reply With Quote Multi-Quote with this Post
Old 03-12-2007, 05:46 PM   #3
DJR02
Blown DJR
 
DJR02's Avatar
 
Join Date: Jan 2005
Location: Brisbane
Posts: 131
Default

Thanks Chris
__________________
DJR320 build No 2
DJR02 is offline   Reply With Quote Multi-Quote with this Post
Old 04-12-2007, 03:50 AM   #4
wodahs
FF.Com.Au Hardcore
 
wodahs's Avatar
 
Join Date: Nov 2005
Location: perth
Posts: 4,355
Default

Quote:
Originally Posted by Chris
Hi Jeff,

The quick answer is just "no", however, we make the recomendations that if a client wants to

*exceed 8-10psi boost
*run camshafts narrower than 112lobe with extra lift
*use the car for competitive use

we recommend upgrading of pump gears and valve springs. On our Blower option engine, all these things are included, however when someone "starts" on a blower program at say, 300-330rwkw, you will find it wont be long before the addiction takes over, and 400 becomes the target, then 500, etc etc.

We take it on a case by case basis, and as cases do vary, we warn people, and leave it at that. A smart client will heed advice and follow a sensible program, and have trouble free motoring.
ive seemed to have hit this extreem but while the lot is wide open might aswell do it all there and then
__________________
yes still (as money n time permit) doing the

rebuilding the zh fairlane with a clevo 400m 4v heads injected whipple blown with aode 4 speed trans to a 9" ....... we'll get there eventually

just remember don't be afraid to try something new.
Remember, amateurs built the Ark...Professionals built the Titanic!

I have taken up meditation... at least it's better than sitting around doing nothing !!
wodahs is offline   Reply With Quote Multi-Quote with this Post
Old 06-12-2007, 09:39 AM   #5
Bluepower
KenneBell Australia
 
Bluepower's Avatar
 
Join Date: Nov 2005
Location: Engine building room
Posts: 1,965
Default

Quote:
Originally Posted by wodahs
ive seemed to have hit this extreem but while the lot is wide open might aswell do it all there and then
Yep - good idea. How's the project coming along??
__________________



Bluepower Racing Developments

Proud Australian Distributors of Kenne Bell superchargers
The Quickest, The Fastest, The Baddest Boss Blower of all.

www.bluepower.com.au



Bluepower is offline   Reply With Quote Multi-Quote with this Post
Old 07-12-2007, 03:28 AM   #6
wodahs
FF.Com.Au Hardcore
 
wodahs's Avatar
 
Join Date: Nov 2005
Location: perth
Posts: 4,355
Default

dash is in but commin out just after chrissy for sand blasting and body work

heads are finnished just gotta get the cams again just after chrissy

monies dryin up abit at the moment ( buyin a house now too ) but will post more pichs in me project area in the mext few weeks
__________________
yes still (as money n time permit) doing the

rebuilding the zh fairlane with a clevo 400m 4v heads injected whipple blown with aode 4 speed trans to a 9" ....... we'll get there eventually

just remember don't be afraid to try something new.
Remember, amateurs built the Ark...Professionals built the Titanic!

I have taken up meditation... at least it's better than sitting around doing nothing !!
wodahs is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:19 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL