Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 30-07-2006, 08:00 PM   #1
stinger73
Starter Motor
 
Join Date: Jul 2006
Posts: 14
Default Removing Door Trims

I give up. I have been trying to remove the drivers door trim on a AU1 Fairmont and it doesn't seem to want to come off. I have removed the screws around the door and a bolt towards the top left corner. I also removed a screw under the power window switch. Am I missing something?. Is their another fastener hidden there somewhere?. I thought is would be pretty straight forward, but it has me stumped.

stinger73 is offline   Reply With Quote Multi-Quote with this Post
Old 30-07-2006, 08:04 PM   #2
AUXRVIII
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 1,463
Default

There is a second bolt behind the door opening lever bezel.
AUXRVIII is offline   Reply With Quote Multi-Quote with this Post
Old 30-07-2006, 08:48 PM   #3
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

One behind the door handle itself, if you pull the door handle as if you were opening the door, you can slide off the plastic surround behind the handle. Slide that off, and there will be a 10mm bolt there.

On the trim there is also a round trim cover, looks like a circle in front of the grab handle. If you pop it out, there is a 10mm bolt behind it too. Then you should be right to pull the trim off.

If its the drivers side, you'll need to slide the trim off the lock button at the top as well.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:56 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL