Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 03-07-2006, 08:01 PM   #1
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Talking my edit results

got my car back friday night from its flash tune. on its first run it pulled about 120rwk after spiro had finished it made 141.7rwk :

the car is an au xr8 auto with 67 on the clock with a full liverpool exhuast and then fitted with a G&D intake(well part of it still waiting for the sheild because they have run out).

the car feels great to drive and cant wait for the new diff to be run so i can go wsid. :

just want to thank to g&d for helping me with getting the airflter to me for tuning before the rest of the intake. also to spiro joe and everyone else at autotech. and i cant leave out richard and all the guys at craft diff.

__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 03-07-2006, 08:44 PM   #2
FTE217
T3/Sprint8
Donating Member2
 
FTE217's Avatar
 
Join Date: Jan 2005
Location: Australia
Posts: 16,617
Default

Well done mate,you can't go wrong at Autotech. The big Greek does a thorough job.
What series AU is it ?
How does the acceleration feel down low ?
__________________
Tickfords T3/TS50 '02
Sprint8 manual Sept 24 '16
Daily Macan GTS
"Don't believe everything you read on the internet. Abraham Lincoln"
FTE217 is offline   Reply With Quote Multi-Quote with this Post
Old 03-07-2006, 08:49 PM   #3
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

Spiro is the right man for the AU V8 tune all right.

I would have liked to see more from an XR8 myself unless this is a 185fwkw AU Series 1 model.
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 03-07-2006, 09:13 PM   #4
galaxy xr8
Giddy up.
 
galaxy xr8's Avatar
 
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,637
Default

Great, as long as the gain is noticable and your happy, I'd love to try the new edit in my XR8???.
galaxy xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 03-07-2006, 09:37 PM   #5
black ute
SII XR8
 
Join Date: Feb 2006
Posts: 55
Default

Good result!
Out of curiosity is the car a series 1? as 120kW seems a little low.
They all say that Spiro's dyno is conservative though which only makes your 20 odd kW gain look better.
black ute is offline   Reply With Quote Multi-Quote with this Post
Old 03-07-2006, 11:04 PM   #6
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Default

yeh its an au 185 motor.

the acceleration is great from down low. will spin the wheels with no problems just by jumping on it
__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 03-07-2006, 11:43 PM   #7
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

....on the topic of Fords at Autotech, man there's stacks there. I went to get my pink slip done and there were a tonne of Fords in the workshop, it's good to see.
__________________


Daily Driver 2019 Ford Escape...looking for XR6T's.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2006, 11:38 AM   #8
FTE217
T3/Sprint8
Donating Member2
 
FTE217's Avatar
 
Join Date: Jan 2005
Location: Australia
Posts: 16,617
Default

Quote:
Originally Posted by loxxr6
....on the topic of Fords at Autotech, man there's stacks there. I went to get my pink slip done and there were a tonne of Fords in the workshop, it's good to see.
Yer it sure has become a Ford carpark,nice to see the Subbies out of the way.
loxx don't you go to cresent mostly ?
__________________
Tickfords T3/TS50 '02
Sprint8 manual Sept 24 '16
Daily Macan GTS
"Don't believe everything you read on the internet. Abraham Lincoln"
FTE217 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2006, 01:01 PM   #9
RspecAU
BA GT-P Owner
 
RspecAU's Avatar
 
Join Date: Jan 2005
Location: In the GT-P
Posts: 1,599
Default

Some nice gains there mate I hope i can good gains from my 200kw V8 with the edit and exhuast which G&D will be doing both real soon.
__________________
DAILY DRIVER/TRACK CAR
BUILD NUMBER 006
299.5 rwkw's 12.74 @108mph ON MT's
ON MAXXIS MAV1's 275/45/17 13.27 @ 106mph
RspecAU is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2006, 01:02 PM   #10
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Default

would have to agree i was very surpised at the number of fords there.
there where some amazing cars there.
__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2006, 02:22 PM   #11
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Default

go luck with it RspecAU g&d now what they are doing in the intake is great. is your car auto or man?
__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2006, 02:39 PM   #12
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

Quote:
Originally Posted by Bluedriver
Yer it sure has become a Ford carpark,nice to see the Subbies out of the way.
loxx don't you go to cresent mostly ?
Last thing I had done at Crescent was the cam change. I've only had the car to a mechanic once since then (pink slip).

I alternate between those two workshops depending on what state the car is in and how much it'll cost me. They're both good.
__________________


Daily Driver 2019 Ford Escape...looking for XR6T's.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2006, 03:14 PM   #13
RspecAU
BA GT-P Owner
 
RspecAU's Avatar
 
Join Date: Jan 2005
Location: In the GT-P
Posts: 1,599
Default

Quote:
Originally Posted by mr_xr8
go luck with it RspecAU g&d now what they are doing in the intake is great. is your car auto or man?
Mines manual
__________________
DAILY DRIVER/TRACK CAR
BUILD NUMBER 006
299.5 rwkw's 12.74 @108mph ON MT's
ON MAXXIS MAV1's 275/45/17 13.27 @ 106mph
RspecAU is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2006, 01:20 PM   #14
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Default

you should get some good results seeing it is a 200kw motor and a manual
__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2006, 09:54 PM   #15
EL8TED
It all counts
 
Join Date: Aug 2005
Location: Adelaide
Posts: 712
Default

i too would have thought the car would be more to the 125-130 in stock trim..
__________________
NWOLB 8 built by Autotech Engineering tuned by KPM
EL8TED is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2006, 09:59 PM   #16
Qwikcorty
V8 Turbo Hoon
 
Qwikcorty's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 1,634
Default

my stock 185 au, has made 140rwkw, id just say that dyno reads low and the 1/4 will tell the story.
Qwikcorty is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2006, 10:17 PM   #17
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

Spiro's dyno is what I would describe as a fair reading one. I have seen lots of Fords run there and you can bet that you will lose 50-60fwkw on this dyno depending on auto or manual. I have seen a 200fwkw XR8 run 139rwkw 220fwkw run 170rwkw. depends on auto or manual a bit and the day but a 185 on that dyno I am thinking 125rwkw is fair.
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2006, 10:41 PM   #18
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

The best results are when the customer is happy and you definately sound happy. If you are tuning for a 1/4 mile then for sure the track sorts out the best and worst of all involved.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2006, 10:39 AM   #19
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Default

yeh the true test will be the 1/4 mile times. i will be down at eastern creek in the next few weeks as soon as i have run the new diff in, and get the rest of the g&d intake.
__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2006, 12:18 PM   #20
bazz
Melbourne Lad
 
Join Date: May 2006
Posts: 80
Default

How much did it cost?
bazz is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2006, 02:09 PM   #21
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Default

the edit or the diff?
__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2006, 06:41 PM   #22
shepv8
V8's for ever
 
Join Date: Aug 2005
Posts: 808
Default

hey mate good result,
Ive got a AU1 XR8 manual with lukey 3 inch catback, K&N filter and edit,
I got 142.5rwkW.
Let me know when youre going to WSID and Ill try and go up too.
Be good to run them side by side...
shepv8 is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2006, 07:09 PM   #23
onfire
FF.Com.Au Hardcore
 
onfire's Avatar
 
Join Date: Feb 2006
Posts: 1,078
Default

Just curious, what do the i6 fortes do at the wheels? And how much do they differ from series 1 to 3.
__________________
FOR SALE: 2 0 0 3 F A L C O N X R 8
http://www.fordforums.com.au/showthr...31#post5041431


onfire is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2006, 08:37 PM   #24
sbutler
335 kw of goodness
 
sbutler's Avatar
 
Join Date: Dec 2004
Location: south of Newcastle
Posts: 6,242
Default

It really doesn't matter what dyno you run them on. There all gonna be different. The main thing is that there was a 21.7kw net gain, forget the final figure, its the gain that matters.
__________________
CAUTION!
STILL Contain's opinion's & fact's that may offend !!!
:



2012 GTP 213 black what was I thinking? NOW FOR SALE>>
http://www.fordforums.com.au/showthread.php?t=11439680
sbutler is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2006, 09:09 PM   #25
xr8ute
Back on the road
 
xr8ute's Avatar
 
Join Date: Dec 2004
Location: Wollongong, NSW
Posts: 3,205
Default

Quote:
Originally Posted by mr_xr8
yeh the true test will be the 1/4 mile times. i will be down at eastern creek in the next few weeks as soon as i have run the new diff in, and get the rest of the g&d intake.
For sure, 1/4 mile is a much better way to compare performance.

I would be very interested to hear how you go at WSID. Good luck
__________________
-------------------------------------------------------------------------

AU XR8 Ute 13.90 @ 100mph - http://www.aufalcon.com/xr8ute
5L Windsor, GT40X heads, Crane 2030, Pacey 4-1s, Lukey 3", 3.91:1, auto. Tuned by me w/Quarterhorse and BinaryEditor.

Coming Soon: Ported lower intake, Tickford "Premium" Brakes, and a good wash.
xr8ute is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2006, 07:32 PM   #26
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Default

diff has now been run in will try and get out to wsid in the next couple of weeks i will post up when i will go at least a week ahead. would be good to see a few other memebers down there.
__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 24-07-2006, 09:24 AM   #27
xr8man83
Grunt Files
 
xr8man83's Avatar
 
Join Date: Apr 2006
Location: Rockhampton QLD
Posts: 466
Default

Quote:
Originally Posted by mr_xr8
got my car back friday night from its flash tune. on its first run it pulled about 120rwk after spiro had finished it made 141.7rwk :

the car is an au xr8 auto with 67 on the clock with a full liverpool exhuast and then fitted with a G&D intake(well part of it still waiting for the sheild because they have run out).

the car feels great to drive and cant wait for the new diff to be run so i can go wsid. :

just want to thank to g&d for helping me with getting the airflter to me for tuning before the rest of the intake. also to spiro joe and everyone else at autotech. and i cant leave out richard and all the guys at craft diff.

the 185kw motor puts out 121kw at the wheels man are you sure your figures are rite??
xr8man83 is offline   Reply With Quote Multi-Quote with this Post
Old 24-07-2006, 12:13 PM   #28
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

A 185kw motor should see around 125 at the treads thats all you would expect. A 200kw XR8 on the same dyno ran 139 when i was there once so it's picked up enough to be about as good as a 200kw AUII XR8 now with the exhaust and tune.
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 10:23 AM   #29
mr_xr8
Capri GT/TS50/GTR
 
mr_xr8's Avatar
 
Join Date: Apr 2006
Location: sydney
Posts: 831
Default

i can post up the dnyo chart when i get home.
__________________
R32 GTR Rebuild

TS50 Build
mr_xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 07:28 PM   #30
Qwikcorty
V8 Turbo Hoon
 
Qwikcorty's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 1,634
Default

Quote:
Originally Posted by jonbays
A 185kw motor should see around 125 at the treads thats all you would expect. A 200kw XR8 on the same dyno ran 139 when i was there once so it's picked up enough to be about as good as a 200kw AUII XR8 now with the exhaust and tune.
that does sound low for a 185, my xr8 on 2 dyno's has shown 140 and 144 rwkw. but its the difference that really matters after tuning.
Qwikcorty is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:53 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL