Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 25-07-2006, 03:15 PM   #1
fipcee
not so stock
 
fipcee's Avatar
 
Join Date: Apr 2005
Location: Brisbane North
Posts: 218
Default Your mags

I am about to spend some dollars on my XR6 and am looking at getting 17" rubber and mags but am very lazy, hence my post. I am wondering if people would be interested in putting a photo on of their mags so I can get a general feel for what looks best, and also the what the damage was. At the moment I have been quoted $1700 for all four corners with Pirelli 235/45/17 and AMG mags in silver/black (I think they are called Illusions). They have 5 chrome spokes and 10 black spokes..sorry I don't have a picture.
I am dropping in King SL all round (quoted $400 fitted which I believe is OK)before I get the new mags and whilst the tyre places are happy to bung on a tyre/mag combo I don't see the point when I have yet to lower it.
The other spend is cat convertor and 2 1/2" sports exhaust $500 fitted.
Silver, AUIII, currently standard.
Any advice or opinions on the above, and photos obviously, will be gratefully accepted.

__________________
Liquid silver AUIII XR6, BA scuff plates with Tickford inserts, proudly displaying AU falcon.com stickers, lowered, K&N panel filter with wide mouth snorkle, 2 1/2 exhaust and hi flo cat, Illusion mags, slotted and drilled rotors.
Next mods: extractors
fipcee is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 03:22 PM   #2
GlennBA
FF.Com.Au Hardcore
 
GlennBA's Avatar
 
Join Date: Jan 2005
Posts: 3,918
Default

17's are too small on a falcon i reckon. Could just be my biased opinion though because of my wheels. 18's tend to look much nicer on them and don't cost that much more.
GlennBA is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 03:24 PM   #3
fipcee
not so stock
 
fipcee's Avatar
 
Join Date: Apr 2005
Location: Brisbane North
Posts: 218
Default

Quote:
Originally Posted by GlennAUII
17's are too small on a falcon i reckon. Could just be my biased opinion though because of my wheels. 18's tend to look much nicer on them and don't cost that much more.
Hiya Glen..does putting 18's on change anything..ie do i have to muck around with the speedo etc etc?? Thanks for the reply.
__________________
Liquid silver AUIII XR6, BA scuff plates with Tickford inserts, proudly displaying AU falcon.com stickers, lowered, K&N panel filter with wide mouth snorkle, 2 1/2 exhaust and hi flo cat, Illusion mags, slotted and drilled rotors.
Next mods: extractors
fipcee is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 03:28 PM   #4
GlennBA
FF.Com.Au Hardcore
 
GlennBA's Avatar
 
Join Date: Jan 2005
Posts: 3,918
Default

hmm.. not sure. I put 19's on my forte (had 16's before) and they look to be the same diameter with the rubber on. Just heaps better lookin and hell wider. Maybe one of the other guys would be able to answer that for you? I believe if it throw it out it wouldn't be by much.
GlennBA is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 03:35 PM   #5
dragenXR6
ON DUBS
 
dragenXR6's Avatar
 
Join Date: Feb 2006
Location: merimbula
Posts: 68
Default

hey guys im new here, from merimbula. do any of you guys know about fiting 20s to an 2001 falcon xr6 ??? very stuck
__________________
south coast rydaz merimbulait:

AU2 Xr6
Black,full pioneer system (on the froor in my garage) 20inchs, and slamed on its guts :thebirds:
COMING SOON airbags : and a bit of shavin Time to drag sum bumper :
FOR SALE $16,500ono
dragenXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 03:50 PM   #6
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

Quote:
Originally Posted by GlennAUII
17's are too small on a falcon i reckon. Could just be my biased opinion though because of my wheels. 18's tend to look much nicer on them and don't cost that much more.
Definately. If the budget can afford it, go 18's or higher.
__________________


Daily Driver 2019 Ford Escape...looking for XR6T's.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 03:53 PM   #7
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

Quote:
Originally Posted by fipcee
Hiya Glen..does putting 18's on change anything..ie do i have to muck around with the speedo etc etc?? Thanks for the reply.
Isn't there an article on www.aufalcon about this ?

Check the workshop section.
__________________


Daily Driver 2019 Ford Escape...looking for XR6T's.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 04:03 PM   #8
HOTC2R
FF.Com.Au Hardcore
 
Join Date: Feb 2006
Location: S.E. Melb
Posts: 670
Default

Go into Show N Shine section in 'General Topics' and click on 'Show us your AU'. Plenty of cars and mags to look at there.
HOTC2R is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 05:01 PM   #9
fipcee
not so stock
 
fipcee's Avatar
 
Join Date: Apr 2005
Location: Brisbane North
Posts: 218
Default

Quote:
Originally Posted by HOTC2R
Go into Show N Shine section in 'General Topics' and click on 'Show us your AU'. Plenty of cars and mags to look at there.
thanks for that HOTC2R, I figured that there would be somewhere on this forum that could help me out. much appreciated
__________________
Liquid silver AUIII XR6, BA scuff plates with Tickford inserts, proudly displaying AU falcon.com stickers, lowered, K&N panel filter with wide mouth snorkle, 2 1/2 exhaust and hi flo cat, Illusion mags, slotted and drilled rotors.
Next mods: extractors
fipcee is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 05:18 PM   #10
Bucknaked
FF.Com.Au Hardcore
 
Bucknaked's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 11,647
Default

Here are my wheels.

19" RJR's (Rodney Jane Blades)



Bucknaked is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 05:21 PM   #11
drcook
I Bleed Orange!
 
drcook's Avatar
 
Join Date: Sep 2005
Location: sydney
Posts: 685
Default

see my sig
__________________
DRCOOK XY BUILD - http://fordforums.com.au/showthread.php?t=56248
drcook is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:38 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL