|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-08-2011, 11:32 AM
|
#1 | ||
|
Donating Member
 Join Date: Aug 2006
Posts: 5,142
|
Morning all,
I have an AU1 Forte that appears to be leaking oil from between the head & block. It is just down behind the thermostat housing in what appears to be some sort of 90 degree angle. I was wondering if this is indeed the head gasket thats leaking or something else? Its just so hard to see in and around there. Also, if it is the Head Gasket, would I be alright in just replacing the gasket? Or should I get the head machined & all that other expensive stuff? Cheers for any help |
||
|
|
|
12-08-2011, 11:59 AM
|
#2 | ||
|
Banned
Join Date: Apr 2007
Posts: 734
|
|
||
|
|
|
|
12-08-2011, 12:16 PM
|
#3 | |||
|
Donating Member
Join Date: Aug 2006
Posts: 5,142
|
Quote:
|
|||
|
|
|
|
12-08-2011, 12:24 PM
|
#4 | ||
|
Banned
Join Date: Apr 2007
Posts: 734
|
Have you degreased and re-checked? Oil leaks around the front are a pain to isolate.
In my experience the three most likely sources of oil leaks on the AU I6 are 1. Timing Chain tensioner - remove and reseal or replace 2. P/Steer pump mount bolts - remove and apply thread sealat (bottom one extends into oil gallery....  )3. Loose timing cover bolts - retension Unusual to have a head gasket leak in the AU Cheers |
||
|
|
|
|
12-08-2011, 12:30 PM
|
#5 | ||
|
Moderator
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
 
|
Is there much oil on the passenger side of the engine much?????
Maybe an oil pressure switch cause oil to be sprayed forward on that side of the engine bay???
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
|
|
|
|
12-08-2011, 12:36 PM
|
#6 | ||
|
Donating Member
Join Date: Aug 2006
Posts: 5,142
|
Yes I have degreased it, & I then started it and it immediately began to weep (albeit VERY slightly) out of the area in question.
EDIT: Just so we all know, the power steering side & all its mounting points are bone dry & clean before i even degreased. Last edited by SSD-85; 12-08-2011 at 12:42 PM. |
||
|
|
|
|
12-08-2011, 12:45 PM
|
#7 | ||
|
Banned
Join Date: Apr 2007
Posts: 734
|
OK, first thing I would do in this instance would be retension the timing cover bolts then recheck.
Cheers |
||
|
|
|
|
12-08-2011, 12:56 PM
|
#8 | ||
|
Donating Member
Join Date: Aug 2006
Posts: 5,142
|
The area where the timing cover meets the head is bone dry. Not a single sign of a leak. Its not even dirty.
Heres a photo of where its leaking.  I couldnt get my camera into the exact area, it is leaking just behind the area circled in red |
||
|
|
|
|
12-08-2011, 01:20 PM
|
#9 | ||
|
rexnet
Join Date: Feb 2010
Location: Adelaide, South Australia
Posts: 3,562
|
good luck. i've got no ideas as to what it could be.
|
||
|
|
|
|
12-08-2011, 02:46 PM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
i think mine has a bit of head gasget oil seepage , but it does`nt loose water and runs like a clock, nearly at 200,000 k`s, if you remove an alloy head you should at the very least get the the head surfaced, it`s not much coin to have the head resurfaced, usually less than $100 depending on the machine shop.
edit; mind you i`m not saying that`s where your leak is. |
||
|
|
|
|
12-08-2011, 05:17 PM
|
#11 | |||
|
FF.Com.Au Hardcore
Join Date: Feb 2008
Location: Geelong, Victoria
Posts: 4,470
|
Quote:
|
|||
|
|
|
|
12-08-2011, 08:09 PM
|
#12 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
That is 99% your timing case cover.Degrease it and retighten the bolts. Failing that I used a pretty blue silastic glue..most leaks dissappeared
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again 
|
||
|
|
|
|
12-08-2011, 08:41 PM
|
#13 | ||
|
Just slidin'
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
|
Scotty, I had the same issue in the blue AU. There is a part where the timing case ends that has a gallery slightly showing on the AU's. Trust me, its weird. For seem to put a bit of gasket glue in there to stop it weeping out. Go have a look at someones thats not leaking, you will see the spot that you have shown, with gasket glue coming out. I degereased and wiped it, and pumped it full of sikaflex. Worked a treat.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure |
||
|
|
|
|
13-08-2011, 08:37 AM
|
#14 | |||
|
Donating Member
Join Date: Aug 2006
Posts: 5,142
|
Quote:
|
|||
|
|
|
I6 Oil leak
Re: I6 Oil leak
Linear Mode
