|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-05-2006, 08:01 AM
|
#1 | ||
|
Starter Motor
Join Date: May 2006
Posts: 2
|
Hello,
I`m posting this on behald of a friend who has a problem with his 99 au fairlane mark-1. The tailshaft has been determined to be out true (causing vibrations) he had another tailshaft fitted, now this is where the question is.... The original tailshaft (yoke part)if roughly 3 inchs shorter than the replacment tailshaft, the new replacent shaft does not vibrate, so we are asking is the reason that the new one does not vibrate is beacuse the yoke(3 inch longer) is sitting further in the trasmission? (also what shaft (yoke)is the correct size? OK what i`m asking does anybody have the original specs for the 1999 ford fairlane AU mark 1 showing total tail shaft length and yoke length, Thanks, Please copy any answers to rgormley1968@yahoo.com Cheers, Richard |
||
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
1999AU fairlane mark-1 tailshaft specs
Linear Mode
