Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 30-03-2005, 10:30 AM   #1
double_d
Guest
 
Posts: n/a
Default 1980 eski van

i am just about to acquire a eski panel van
sounds better tham buying !!!!!!!!!
but was just wondering what sort of common problems should i look out for
i have seen the car and it looks straight with no rust engine starts and idles nice
has an EEEEEEEEEEEEWWWWWWWWWWWWW auto that changes seems to be fine
but as the car is unregistered i could not drive it
but not to worried if i have to spend a couple hundry to get it right
thankyou
daniel
  Reply With Quote Multi-Quote with this Post
Old 30-03-2005, 11:15 AM   #2
kiwikid
have you seen my marbles?
 
kiwikid's Avatar
 
Join Date: Feb 2005
Location: land of oz
Posts: 570
Default

rust in the heater dome..
bushes all round are proberly fukked..
wheel bearings..
__________________
comfortably numb...
kiwikid is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2005, 12:14 PM   #3
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

Is it a 1.6 or a 2.0??
__________________
Current Rides:
2000 AU 5L XLS ute; 1970 Mustang project
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2005, 03:50 PM   #4
double_d
Guest
 
Posts: n/a
Default

it is a 1.6 litre
bushes and wheel bearings dont worry me
i didnt se rust in the heater box looking around firewall
  Reply With Quote Multi-Quote with this Post
Old 30-03-2005, 10:30 PM   #5
kiwikid
have you seen my marbles?
 
kiwikid's Avatar
 
Join Date: Feb 2005
Location: land of oz
Posts: 570
Default

you wont see it, it will be inside the actual dome thats if there is any rust..
__________________
comfortably numb...
kiwikid is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2005, 11:55 PM   #6
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

Tip a jug of water down the front of the windscreen. If water appears on the carpet covering the footwells, then you have rust in the bulkhead/dome....
__________________
Current Rides:
2000 AU 5L XLS ute; 1970 Mustang project
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 23-04-2005, 07:03 PM   #7
LuvinmyEB
Beware of mood swings!
 
LuvinmyEB's Avatar
 
Join Date: Dec 2004
Location: Western 'burbs, put your bullet proof vests on!
Posts: 1,336
Default

Quote:
Originally Posted by '67
Tip a jug of water down the front of the windscreen. If water appears on the carpet covering the footwells, then you have rust in the bulkhead/dome....
I have that problem in the Mk I Esky, can just see the hole but it lets a hell of a lot of water in. Seal it as soon as you can (if it does leak) or keep your Esky under cover all the time.
__________________
1993 EBII GLi Auto, 4.0L MPI rebuilt by JMM, JMM Dev1 kit, JMM Hi Flow Cat, still to hit the quarter mile.
LuvinmyEB is offline   Reply With Quote Multi-Quote with this Post
Old 06-05-2005, 08:37 PM   #8
buickman
buickman
 
buickman's Avatar
 
Join Date: Dec 2004
Location: eastern suburbs Melb Vic
Posts: 1,462
Default

They rust out in the phlenum chambers.To properly fix it you need to cut the bulk head of to cut the rust out and panel patch in another or a easier fix is to pull the heater and under dash bolt ons and clean and fiberglass it then paint it with a sealer. Leaves and muck gather around the air vent opening and over a period of years it gets rust holes in it. The only cars I've seen without the problem were cars that had been garaged most of of the time.

buickman
buickman is offline   Reply With Quote Multi-Quote with this Post
Old 16-04-2005, 07:13 PM   #9
TIKFD6
Number 5 is alive!
 
TIKFD6's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Vic
Posts: 3,438
Default

Im not looking forward to doing this myself when i pic up my Van.
Same thing, "80 MKII 2lt 4speed.
__________________
Kerry
Tickford wings are for Tickford cars!

"Experimental Racer" #6
1994 Gunmetal XG XR6 1997-1999
[B][COLOR=Red] 1994 Le Mans Red ED
2008 MA XR5 Mondeo

2015 VOLVO V60 T6 R-DESIGN-POLESTAR Enhanced



TIKFD6 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:16 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL