|
|
|
|
|
|
|
27-06-2006, 06:07 PM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2006
Posts: 5
|
howdy.
was just wondering what size rims most of you guys are running? ive got a mk2 4dr escort ghia.. and was wanting to put either 15" or 16" rims under it.. ive been told that anything over 14" is asking for trouble.. would 16"s scrape? even with the guards rolled?? cheers guys |
||
|
|
|
27-06-2006, 06:20 PM
|
#2 | ||
|
Regular Member
Join Date: Apr 2006
Posts: 72
|
Im running, 13 inch speedway rims. Looks pretty tough with 205's, not sure what everyone else runs. But keep in mind eventually by getting a wheel with a larger radius you are increasing the inaccuracy of your speedometer, and if it bothers you (or the police) it will need to be recalibrated. 15' and 16' look just fine. Anything bigger looks ****in stooopid.
 :
|
||
|
|
|
|
27-06-2006, 06:26 PM
|
#3 | ||
|
Starter Motor
Join Date: Jun 2006
Posts: 5
|
yeah i know about the speedo thing (first year mech apprentice) but if i reduce the size of the side wall it should still be alright...
and it is legal to increase the circumfrence of your wheels by 26mm or reduce the circumference by 15mm. im also currently running 13" (i think speedways not sure) but only on like 195? cheers for the quick reply |
||
|
|
|
|
27-06-2006, 08:09 PM
|
#4 | ||
|
Regular Member
Join Date: Mar 2006
Posts: 65
|
im running 15 inch superlights.. suits my mk2 coupe well.. i got 195's on the front and 205's on the back the only downside is that when ive got the steerin wheel full lock to the right, it scrapes a s*** load on the inside of the front left wheel well.. but other than that its fine
|
||
|
|
|
|
27-06-2006, 08:16 PM
|
#5 | ||
|
eskie freek
Join Date: Jul 2005
Location: rutherglen
Posts: 1,083
|
i run 13inch factory mimilights with 195 on the from and 225s on the back on a mk1 2door with no problems
__________________
black mk1 on goin project/ toy 94 ef xr8 toyota 60 series project with 6inch lift and 35z  Xd sedan project for sale mk1 4 door project car for sale Mk2 4door 1.6lt for sale |
||
|
|
|
|
27-06-2006, 08:47 PM
|
#6 | ||
|
Regular Member
Join Date: Mar 2006
Location: Taren Point
Posts: 48
|
i got 13 by 6.5 rims with 205's and 2" lowered and i dotn have any trouble
|
||
|
|
|
|
28-06-2006, 06:39 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Adelaide, SA (down South)
Posts: 623
|
depending on which state your in( as rules change for different states), in sa, your allowed to go two inches bigger than what was standard on that vehicle, and as long as your wheel has the same rolling diameter as standard( eg. bigger mag, lower profile tyre) it wont mess with your speedo. and if your new mags have the right offset and there not stupidly wide, they wont scrape!
__________________
New Project: 1980 MK2 Escort Panel Van, 2lt, auto  Soon to be painted running a 4.0ltr v6  See the build here http://www.fordforums.com.au/showthread.php?t=11388068 You Have Freedom of Speech Just Choose to Remain Silent |
||
|
|
|
Rims?
Hybrid Mode