|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
26-01-2010, 07:40 PM
|
#1 | ||
|
Regular Member
Join Date: Apr 2007
Posts: 128
|
Last night my engine light came on and i had two codes teh one i cant figure out what it is is U2514... can anyone please tell me what this porblem code is referring to...
|
||
|
|
|
27-01-2010, 04:40 PM
|
#2 | ||
|
TBA Customs
Join Date: Jan 2005
Location: giving you what you need
Posts: 3,275
|
Might be best to contact one of the tuners bud, they would no doubt have an answer for you.
__________________
|
||
|
|
|
|
18-03-2010, 12:19 AM
|
#3 | ||
|
Donating Member
 Join Date: Dec 2006
Posts: 5,547
|
Anyone know the answer to this? I have it as well
I cant find it in the manual |
||
|
|
|
|
18-03-2010, 12:40 AM
|
#4 | ||
|
VFII SS UTE
Join Date: Apr 2007
Location: Central Coast
Posts: 6,353
|
__________________
I don't often hear the sound of a screaming LSX. But when I do, So do the neighbours.. GO SOUTHS
|
||
|
|
|
|
18-03-2010, 02:16 AM
|
#5 | ||
|
VIC The Place to Boost
Join Date: Apr 2007
Location: Melbourne
Posts: 1,643
|
Just go to clear DTC and it should clear it mate...
__________________
F6 310 - Blue Power Racing Developments |
||
|
|
|
|
18-03-2010, 09:30 AM
|
#6 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,371
|
DTC: U2514
Description: Message for VSS missing Electrical: Damaged wiring or connections between the VSS and PCM. Other: Error on the SCP system between the VSS, PCM, IC and DLC Incorrect VID programmed in to PCM. PCM, IC, ABS not running current software and calibrations. I don't know why people don't use the resources we provide here where you can look then up. Cheers Russ
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
18-03-2010, 12:49 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Mornington
Posts: 2,147
|
It just may be that some people are not aware of what is available and need guidance don't you think?? It always pays to at least ask.
Cheers GT 450 |
||
|
|
|
|
18-03-2010, 09:29 PM
|
#8 | ||
|
Donating Member
Join Date: Dec 2006
Posts: 5,547
|
I did find your link eventually Russ thanks
But when I typed in U2514 in search all I got was this thread so I started here Code was cleared and hasn't come back |
||
|
|
|
|
27-10-2014, 03:55 PM
|
#9 | ||
|
Starter Motor
Join Date: Jan 2014
Posts: 2
|
Ford territory 2005 is giving error code u2514. Can someone tell me how to resolve
Regards Sunail 0477896997 |
||
|
|
|
|
18-03-2010, 11:50 PM
|
#10 | ||
|
Regular Member
Join Date: Apr 2007
Posts: 128
|
guys i have another code that come up its p1000 whats this mean...
|
||
|
|
|
|
19-03-2010, 12:42 AM
|
#11 | ||
|
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,371
|
DTC # P1000
Description: Monitor Testing Not Complete Mechanical: The on board diagnostic II (OBD II) monitors are performed during the OBD II Drive Cycle. The DTC will be stored in continuous memory if any of the OBD II monitors do not complete. Sensor: *Vehicle is new from the factory *Battery or PCM had recently been disconnected *An OBD II monitor failure had occurred before completion of an OBD II drive cycle *PCM DTCs have recently been cleared with a scan tool *PTO circuit is shorted to VPWR or B+ or PTO is on during testing Electrical: The DTC does not need to be cleared from the PCM except to pass an inspection/maintenance test. Go to our DTC Reference Search and select a model and enter a code. If you don't find it under the model use the REF model option as it uses the OBD Reference table as a secondary look up. Cheers Russ
__________________
Observatio Facta Rotae
|
||
|
|
|
|
21-03-2010, 11:14 PM
|
#12 | ||
|
Regular Member
Join Date: Apr 2007
Posts: 128
|
thanks russel you have been a great help
|
||
|
|
|
Hi Guys anyone able to help with dtc problem codes for livewire...
Hybrid Mode